A few years ago, the iPhone was the king of the smartphone charging station.

The iPad, in contrast, was a laggard.

The iPhone has a built-in battery, and even with the latest iPad mini, it takes up a fair bit of space to charge.

But the iPad has the ability to charge in the car, using a proprietary charger.

With a few simple tweaks, you can get your iPad to charge the way your iPhone does.

Here’s how.

Charging in the Car Charging your iPad or iPhone in the backseat is an exercise in futility.

Just plug in your charger and go.

But charging in the trunk is where it gets tricky.

First, the charging cable must be connected to the car’s USB port.

That’s where your phone plugs into.

Then, you’ll have to figure out how to make the cable fit snugly around your car.

There are two methods to doing this: Use the “plug and play” method, which is how it was done on the iPhone, and use a longer cable.

Using the “Plug and Play” Method To get the most out of your iPad’s charging cable, you have to make sure it’s snug and that it won’t bend.

To do this, you should put your iPad in your trunk.

First find a place where the battery is secure.

The easiest place to do this is under the hood of your car, where you can keep your phone plugged in while it charges.

If your iPad doesn’t fit in the hood, the easiest way is to just put it on top of the hood.

Make sure your iPad is on top when you’re trying to charge, as you don’t want to pull it out when the car is starting up.

The longer the cable, the more secure your iPad will be.

To get a snug fit, plug the cable into your car’s outlet, which has a large metal door.

That door is usually right next to the charging port.

Plug the charger into the car with the plug and play method.

The charger will automatically detect the cable and attach the charger to the outlet.

You’ll need to make a couple of adjustments to the cable.

The first is to make it as long as possible.

If the cable is too long, the charger will charge the iPad too quickly.

Make the cable as long or longer than the cable you normally charge your iPhone.

Next, you need to figure how long the cable will take to charge a certain amount of time.

Plug your charger into your vehicle’s USB socket and find your iPad.

If it is connected to your computer or other device, the iPad will display the number of charging cycles you need.

If you plug it into the computer, the number will be displayed on the iPad’s screen.

If, instead, the cable has no connection to your car or the computer and you’re using a USB cable, it will display “No Connections” instead.

Now plug your charger back into the outlet, and your iPad should charge.

If there’s a charging cable that isn’t connected to an outlet, your iPad won’t charge and will show “Unknown Charging.”

If there is a charging plug, it’ll charge your iPad for you.

Plugging in the iPhone Charging the iPad in the rear seat is more complicated.

First of all, you will have to adjust the length of the cable so that it’s as long and snug as possible when plugged into the trunk.

Then you will need to adjust your charging mode to “Plug in.”

This means that you’ll be able to charge while the car has running air.

But your iPhone will still not charge the car.

That means your iPad isn’t charging.

Now that your iPad has been charged, you’re ready to charge it.

Plug in the charger and follow the instructions on the screen.

The charging cable will automatically identify itself, and the charger is now plugged into your trunk with a simple press of the charging button.

After the charging process is complete, your car should be ready to drive again.

You can also connect your iPhone to the vehicle’s audio system and listen to music.

When the car starts up, the music will start playing and your car will charge again.

The next time you need a charge, plug in the charging plug and listen again.

Once your iPad charges, the car will automatically start charging again.